20 5900 shepherd mountain cove ? austin, tx 78730 phone: 512 / 794-0081 ? fax: 512 / 794-0087 ? toll free: 800 / 950-8365 e-mail: sales@venkel.com ? www.venkel.com high voltage dielectric strength is equal to 1.5 times rated voltage (wvdc) for 500 volt capacitors and 1.2 times (wvdc) for 1,000 through 5,000 volt capacitors. circuit applications in excess of 1,000 volts may require a surface coating to prevent external arcing. how to order c1206 c0g 501 101 j n h e series temperature rated voltage capacitance tolerance code: termination marking packaging see chart characteristic 1st two digits (pico - farads) j = 5% p = palladium silver 6 = eia j code e = embossed tape are significant, 1st two digits k = 10% n = nickel barrier, leave blank if followed by are significant m = 20% tinned termination no marking number of zeros followed by number standard termination finish for this product 201 = 200 v of zeroes. is 100% matte tin (sn) 251 = 250 v 101 = 100 pf 501 = 500 v r denotes decimal 601 = 600v 6r8 = 6.8 pf * 631 = 630v 102 = 1000 v 202 = 2000 v 302 = 3000 v 402 = 4000 v 502 = 5000 v specifications: operating temperature range: -55c to +125c temperature coefficient: 0 30ppm / c temperature voltage coefficient: 0 30ppm / c dissipation factor: 0.1% max. insulation resistance: >1000 ohms f or 100 g ohms, whichever is less at 25c, vdcw. (the ir at 125c is 10% of the value at 25c) withstanding voltage: see below test parameters: 1mhz 50khz at 1.0 0.2 vrms 100 pf, 25c 1khz 50hz at 1.0 0.2 vrms > 100 pf, 25c capacitance tolerance: j,k np0/c0g: class i dielectric; ultra stable electrical characteristics over time, voltage, frequency and temperature changes. low dielectric loss. specifications: operating temperature range: -55c to +125c temperature coefficient: 0 15% ? c max. temperature voltage coefficient: x7r not applicable dissipation factor: 2.5% max. iinsulation resistance: >1000 ohms f or 100 g ohms, whichever is less at 25c, vdcw. (the ir at 125c is 10% of the value at 25c) withstanding voltage: see below test parameters: 1khz 50hz at 1.0 0.2 vrms, 25c capacitance tolerance: j, k, m x7r: stable class ii dielectric. all components in this section are rohs compliant per the eu directives and definitions. * 630v caps are available for any 500v capacitor ranges.
ceramic chip capacitors 5900 shepherd mountain cove ? austin, tx 78730 phone: 512 / 794-0081 ? fax: 512 / 794-0087 ? toll free: 800 / 950-8365 e-mail: sales@venkel.com ? www.venkel.com 21 note: (1) standard ranges begin at 10pf. please consult your sales representative if values below 10pf are required. (2) thickness may exceed the t(max) specification if capacitance and rated voltage are near the end of the range. please advise your sales representative if thickness is a concern. 102 t l w end band 250v 500v 1,000v 2,000v 3,000v 4,000v 273 102 123 272 250v 500v 1,000v 2,000v 102 153 250v 500v 1,000v 2,000v 3,000v 4,000v 332 683 562 124 152 183 221 222 121 102 470 471 500v 1,000v 2,000v 3,000v 4,000v 5,000v 682 472 124 224 222 273 471 103 221 222 101 681 103 224 562 104 102 682 471 472 271 821 101 391 500v 1,000v 2,000v 3,000v 4,000v 5,000v 183 394 822 104 122 223 102 392 471 152 181 681 1210 size *l .125 3.18 *w .095 2.41 t(max) .085 2.16 max e/b .020 .508 1808 size *l .180 4.57 *w .080 2.03 t(max) .095 2.41 max e/b .020 .508 1812 size *l .177 4.49 *w .125 3.18 t(max) .118 2.75 max e/b .020 .508 1825 size *l .180 4.57 *w .250 6.35 t(max) .128 2.75 max e/b .020 .508 voltage and capacitance range 250v 500v 1,000v 2,000v 332 473 102 473 681 562 472 104 222 563 151 102 221 152 1206 size *l .125 3.18 *w .062 1.58 t(max) .080 2.03 max e/b .020 .508 250v 500v 1,000v 0805 size *l .080 2.03 *w .050 1.27 t(max ) .065 1.65 max e/b .020 .508 2225 size *l .225 5.72 *w .250 6.35 t(max) .128 2.75 max e/b .020 .508 capacitor case size rated wvdc in. mm 10 pf 100 pf 1000 pf .01 f .1 f 821 471 * tolerance: 0.010" npo or x7r x7r only x7r non-rohs compliant
|
